61 13 ... Removing And Installing/Replacing Fibre-Optic Cable Connector

IMPORTANT:

Comply with notes and instructions on handling FIBRE-OPTIC CABLES .

Necessary preliminary tasks:

E60:

E61:

Insert a small screwdriver into openings (1).

Expand catches of cover (2) and remove cover (2) in direction of arrow.

Fig 1: Removing Catches Of Cover

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

Fibre-optic cables with locks at top can be removed directly.

Before the fibre-optic cables with locks at the bottom are removed, the fibre-optic cable connector (4) must be removed from the holder (3).

Removing a fibre-optic cable:

Lift lock (1) carefully and feed fibre-optic cable (2) out of connector (4).

Installation:

Make sure fibre-optic cable (2) is correctly engaged in fibre-optic cable connector (4).

Fig 2: Identifying Fibre-Optic Cable, Fibre-Optic Cable Connector And Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Removing connector (2) from holder (3):

Release lock in bore (1) by pressing and remove fibre-optic cable connector (2) in direction of arrow from holder (3).

Fig 3: Removing Connector From Holder

Courtesy of BMW OF NORTH AMERICA, INC.