61 13 ... Removing And Installing/Replacing OBD-II Socket

Special tools required: 

• 61 0 315

Necessary preliminary tasks: 

• Remove FOOTWELL SIDE TRIM PANEL ON A-PILLAR, LEFT

Release screws (1).

Remove OBD-II socket (2) from holder (3).

Fig 1: Identifying OBD-II Socket From Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Remove OBD-II socket cover (2) from OBD-II socket (1).

Unlock slide plate (3) with a suitable tool in direction of arrow.

Insert special tool 61 0 315  in OBD-II socket (1) in direction of arrow and press out associated flat spring contact (4). Press remaining flat spring contacts with special tool 61 0 315  out of OBD-II socket (1).

Installation: 

Pay attention to pin assignment of OBD-II socket (1).

Make sure flat spring contacts and slide plate (3) are correctly engaged and seated in OBD-II socket (1).

Fig 2: Removing OBD-II Socket Cover From OBD-II Socket

Courtesy of BMW OF NORTH AMERICA, INC.