61 35 127 Removing And Installing/Replacing Body Gateway Module
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
Necessary preliminary tasks:
- Remove LUGGAGE COMPARTMENT TRIM ON SIDE PANEL ON RIGHT
- Disconnect negative battery cable
- Remove TRIM FOR INSTRUMENT PANEL, BOTTOM LEFT
NOTE:
Open glovebox.
Unclip pin (1) from retaining strap (2).
Unclip pin (1) from shock absorber (2).
Open rotary clips (1) and remove cover (2) in direction of arrow.
Release screws (1).
Pull fuse holder (2) back slightly.
Detach AIRBAG CONTROL UNIT WITH GATEWAY MODULE .
Unlock plug connections (1) and disconnect.
Unlock catches (3) in direction of arrow and remove body module (2) from equipment carrier (4).
Replacement:
Carry out PROGRAMMING/ CODING