61 35 285 Removing And Installing (Replacing) Light Module

Necessary preliminary tasks: 

• Remove TRIM PANEL FOR PEDAL ASSEMBLY .

Unlock catch (1) and feed out/remove light module (2) in direction of arrow.

Installation: 

Make sure light module (2) is correctly seated in mounting (3) and catch (1).

Fig 1: Unlocking Catch

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, unlock catch (1) and remove cover (2) from light module (3).

Installation: 

Make sure cover (2) is correctly seated on light module (3).

Fig 2: Removing Cover From Light Module

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 3: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out PROGRAMMING/ CODING