Rad2 Cannot Be Programmed After Programming Abort (09 06 06)

Publication date: 2006-02-03
Reference number: 09 06 06

RAD2 CANNOT BE PROGRAMMED AFTER PROGRAMMING ABORT

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B 09 06 06, Date of Issue: February 3, 2006

BMW:	E90/E91 (3 Series)
GROUP:	Programming/Coding Explanations

Superceded Bulletin(s): S.I. B09 06 06, Date of Issue: January 2006

NOTE: This Service Information bulletin supersedes S.I. B09 06 06 dated January 2006

SUBJECT

RAD2 Cannot be Programmed after Programming Abort

SITUATION

After a programming abort on the RAD2 (Radio 2) control module during a programming session, the final report shows that RAD/BO and/or M-ASK-H have failed to respond. After restarting the programming session, the status report states that one or both control modules need to be replaced.

CAUSE

RAD2 cannot transfer the correct part information to Progman when not programmed correctly.

CORRECTION

Progman V20.02.00 or later contains software that allows re-programming of aborted RAD2 control modules.

Progman V20.02.00 was released as an online-update 02/01/2006.