32 00... Moving Vehicle Into Design Position

Necessary preliminary tasks: 

• Move VEHICLE INTO NORMAL POSITION .

• Version with air spring system: 
  • Remove ignition key
  • Pull fuse for air supply unit control unit
• Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance (refer to FRONT AXLE - RIDE HEIGHT E60 . RIDE HEIGHT E60 / 530I, 550I / SECURITY , or RIDE HEIGHT E60 LONG VERSION and REAR AXLE - RIDE HEIGHT E60 , RIDE HEIGHT E60 / 530I, 550I / SECURITY , or RIDE HEIGHT E60 / LONG VERSION ).

  Measure RIDE-LEVEL HEIGHT OF VEHICLE