61 35 030 Removing and Installing (Replacing) Power Module

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) . See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)

Necessary preliminary tasks:

Unclip electric lead (1) at point (2).

Pull power module (3) slightly out of mounting for control units (4).

Unfasten plug connection (5) and disconnect.

Remove power module (3).

Fig 1: Identifying Power Module, Control Units & Electric Lead

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding . See VEHICLE PROGRAMMING AND CODING