86 10 ... Disassembly of front protection bar

Release screws (1) on cross-member (2).

Installation: 

Use new self-locking nuts.

For tightening Torque refer to 86 10 4AZ in 86 10 PLATFORM .

Installation: 

For tightening Torque refer to 86 10 5AZ in 86 10 PLATFORM .

Fig 1: Screws And Cross-Member

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on longitudinal member (2).

Installation: 

For tightening Torque refer to 86 10 5AZ in 86 10 PLATFORM .

Fig 2: Screws And Longitudinal Member

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on cross-member (2).

Installation: 

Use new self-locking nuts.

For tightening Torque refer to 86 10 4AZ in 86 10 PLATFORM .

Installation: 

For tightening Torque refer to 86 10 5AZ in 86 10 PLATFORM .

Fig 1: Screws And Cross-Member

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on longitudinal member (2).

Installation: 

For tightening Torque refer to 86 10 5AZ in 86 10 PLATFORM .

Fig 2: Screws And Longitudinal Member

Courtesy of BMW OF NORTH AMERICA, INC.