86 10 ... Disassembly of loading ramp frame/disassembly of rail, left/right

NOTE: Two persons are required to disassemble the loading ramp frame.

Disassembly of license plate mounting plate refer to 86 10 ... Disassembly of license plate mounting plate.

Release screws (1) of loading ramp frame (2) on cross-strut (3).

Installation:

For tightening torque refer to 86 10 7AZ in 86 10 PLATFORM .

Fig 1: Screws, Loading Ramp Frame And Cross-Strut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1, 2) on left and right sides of loading ramp frame (3).

Installation:

Use new self-locking nuts.

For tightening torque refer to 86 10 8AZ in 86 10 PLATFORM .

Fig 2: Screws On Left And Right Sides Of Loading Ramp Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1, 2, 3).

Installation:

Use new self-locking nuts.

For tightening torque refer to 86 10 9AZ in 86 10 PLATFORM .

Fig 3: Screws

Courtesy of BMW OF NORTH AMERICA, INC.