86 10 ... Replacing 12 volt socket

From underside of platform, cut through cable tie (1) and remove. Disconnect plug with grommet (2) from socket (3) towards bottom.

Installation: 

Position all seals correctly. Also secure plug with grommet (2) using new cable tie to other socket.

Fig 1: Volt Socket Cable Tie And Removal Direciton

Courtesy of BMW OF NORTH AMERICA, INC.

On upper side of platform, release Phillips screws (1) on mounting bracket (2).

Fig 2: Phillips Screws And Mounting Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound along white marking (1).

Installation: 

Make sure cable is correctly laid.

Use Sikaflex 221 as sealing compound.

Fig 3: Sealing Compound White Marking

Courtesy of BMW OF NORTH AMERICA, INC.

Grip under mounting bracket (1) with a screwdriver and lever out bracket (1) towards top. Remove bracket (1).

Fig 4: Mounting Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1). Remove socket (2) from mounting bracket (3).

Fig 5: Nut, Socket And Mounting Bracket

Courtesy of BMW OF NORTH AMERICA, INC.