86 10 ... Replacing rear light

Release thumb screws (1), slide light guard (2) in direction of middle of car and tilt out towards rear.

Fig 1: Light Guard And Thumb Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Turn handwheel (1) counterclockwise in direction of arrow and remove base (2).

Fig 2: Handwheel, Base And Turning Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and press rear light (2) out towards front.

Installation: 

Use new self-locking nuts.

For tightening torque refer to 86 10 1AZ in 86 10 PLATFORM .

Fig 3: Rear Light And Mounting Nuts

Courtesy of BMW OF NORTH AMERICA, INC.