April 5, 2026: LEMON Manuals is launched! Read the announcement.

86 10 ... Disassembly Of Loading Ramp Frame/Disassembly Of Rail, Left/Right

NOTE: Two persons are required to disassemble the loading ramp frame.
Disassembly of license plate mounting plate, refer to 86 10 ... DISASSEMBLY OF LICENSE PLATE mounting plate.
Disassembly of pull rod, refer to 86 10 ... DISASSEMBLY OF OVERRUNNING EQUIPMENT .

Release screws (1) of loading ramp frame (2) on cross-strut (3).

Installation:

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 1: Identifying Screws Of Loading Ramp Frame On Cross-Strut

G04786648

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1, 2) on left and right sides of loading ramp frame (3).

Installation:

Use new self-locking nuts.

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 2: Identifying Screws On Left And Right Sides Of Loading Ramp Frame

G04786649

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1, 2, 3).

Installation:

Use new self-locking nuts.

Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .

Fig 3: Identifying Screws

G04786650

Courtesy of BMW OF NORTH AMERICA, INC.