Specifications Index
X3 SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Axle Nut/Hub Nut (Collar Nut) | 310 Ft. Lbs. (420 N.m) | |
| Battery | BATTERY | |
| Brakes | ||
| Bleeding Sequence | BRAKE TESTING AND BLEEDING | |
| Disc Brakes | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Charging | ||
| Generator | NA | |
| Torque | ALTERNATOR WITH DRIVE AND MOUNT | |
| Drive Belts | ||
| Adjustment | V-RIBBED BELT WITH TENSIONER | |
| Belt Routing | V-RIBBED BELT WITH TENSIONER | |
| Engine Cooling | ||
| General Service Specifications | TECHNICAL DATA | |
| Radiator Cap Pressure | TECHNICAL DATA | |
| Thermostat R & I | THERMOSTAT AND CONNECTIONS | |
| Water Pump R & I | WATER PUMP WITH DRIVE | |
| Engine Mechanical | ||
| Compression | ENGINE, GENERAL | |
| Oil pressure | Oil pressure at idle speed with engine at operating temperature: .5 min bar; regulated pressure: 4 bar | |
| Overhaul | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | FLYWHEEL | |
| Fuel System | ||
| Fuel Filter Location | In Tank, Integral With Pressure Regulator | |
| Fuel Filter R & I | FUEL PUMP | |
| Pressure Release Procedure | NA | |
| Pressure Specification | 50 psi (344 kPa) | |
| Fuel Pressure Test Procedure | FUEL PUMP WITH DRIVE AND LINE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER INDENTIFICATION | |
| Ignition Wires (Routing) | Coil on plug | |
| Spark Plug | ||
| Type | ILZFR6D11 | |
| Gap | Not Adjustable | |
| Torque | 23 Ft. Lbs. (31 N.m) | |
| Starting | ||
| Starter | NA | |
| Torque | STARTER WITH MOUNTING | |
| Wheel Alignment | ||
| Adjustment Specifications | ELECTRONIC CHASSIS ALIGNMENT | |
| Torque | TIGHTENING TORQUES | |
| Wheel & Tire | ||
| Wheel Lug Nut Torque | TIGHTENING TORQUES | |