86 10 ... Disassembly of Rear Apron

NOTE: Remove rear light,
refer to 86 10 ... REPLACING REAR LIGHT .
Remove plastic bush/metal bush
refer to 86 10 ... REMOVING PLASTIC BUSH/METAL BUSH .

Cut through sealing compound (1) on left and right and remove.

Drill out rivets (2) on left and right sides on lower apron edge.

Installation:

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Rivets On Left And Right Sides On Lower Apron Edge

Courtesy of BMW OF NORTH AMERICA, INC.

Cut through sealing compound (1) and remove.

Drill out rivets (2).

Installation:

Use Sikaflex 221 as sealing compound.

Fig 2: Identifying Sealing Compound And Rivets

Courtesy of BMW OF NORTH AMERICA, INC.