41 00... Frame Alignment Control Body Dimensions
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Dimensions in mm.
Dimension tolerances:
- ≤ 1000 mm ± 1.5 mm
- ≥ 1000 mm ± 2.5 mm
The control points shown serve to check the body and the set of attachments.
The specified dimensions/measurements refer to the center point of the bore/screw.
Under Body View 1
Fig 1: Under Body Frame Alignment Control Body Dimensions And Measurement Points (Under Body View 1)
Under Body View 2
Top View, Front End
Fig 3: Engine Compartment Frame Alignment Control Body Dimensions And Measurement Points (Top View, Front End)
The specified dimensions refer to removed assemblies.
View, B-Pillar
Measurement a=1566 mm between screw-on points of door brakes.
View C-pillar (Touring only)
Measurement a=1290 mm between attachment points of inertia reel.