86 10... Replacing Rear Light

Release thumb screws (1), slide light guard (2) in direction of middle of car and tilt out towards rear.

Fig 1: Identifying Thumb Screws And Light Guard

Courtesy of BMW OF NORTH AMERICA, INC.

Turn handwheel (1) counterclockwise in direction of arrow and remove base (2).

Fig 2: Identifying Handwheel And Base

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and press rear light (2) out towards front.

Installation: 

Use new self-locking nuts.

Tightening Torque: refer to 86 10 1AZ  . See PLATFORM for specs.

Fig 3: Identifying Nuts And Rear Light

Courtesy of BMW OF NORTH AMERICA, INC.