86 10... Removing wheel bearing

The angular-contact ball bearings do not require maintenance and have lifetime lubrication. The bearings cannot be readjusted.

Remove brake drum,

Lever out both snap rings (1).

Installation:

Replace expanded or damaged snap rings (1). Ensure correct seating.

Fig 1: Removing Snap Rings

Courtesy of BMW OF NORTH AMERICA, INC.

Press out wheel bearing with special tool 24 1 010.

CAUTION: Do not reuse old wheel bearing.

Fig 2: Pressing Out Wheel Bearing Using Special Tool (24 1 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Place new wheel bearing (1) with lathe-turned end (2) in center of bore in brake drum (3).

Installation:

Before pressing in new wheel bearing, check bearing seat for possible damage.

Make sure wheel bearing is not tilted when pressed in.

Fig 3: Identifying Brake Drum, Wheel Bearing With Lathe-Turned End

Courtesy of BMW OF NORTH AMERICA, INC.

Press in new wheel bearing (1) with special tool 23 2 150 and 33 1 374.

Fig 4: Pressing Wheel Bearing Using Special Tool (23 2 150) And (33 1 374)

Courtesy of BMW OF NORTH AMERICA, INC.