61 13... Opening plug housings and removing contacts of different plug systems: Notes
Special tools required:
- 61 0 300 . See GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS .
- 61 0 400
- 61 1 150
| Abbreviations of contacts and what they mean: | |
|---|---|
| D 1.5 / 2.5 | Round contacts of 1.5 mm or 2.5 mm diameter |
| MDK 3 plus | Miniature double flat spring contact |
| JPT ELA | Junior Power Timer flat spring contacts with strand sealing |
| DFK ELA | Double flat spring contacts with strand sealing |
| Elo | Electronic contacts with and without strand sealing Manufacturer: Siemens |
| Elo Power | Electronic contacts for heavy loads with and without strand sealing Manufacturer: Siemens |
| MQS | Micro Quadlock System electronic contacts with and without strand sealing Manufacturer: AMP |
| MPQ | Micro Power Quadlock electronic contacts for heavy loads with and without strand sealing Manufacturer: AMP |
IMPORTANT:
The contacts can be changed on ultrasonically welded connectors (1).
Ultrasonically welded connectors (1) must be replaced completely.
Ultrasonic-welded connectors (1) can be identified by the welds (2) on their longitudinal side.
NOTE:
Special tools referred to in the repair instructions below are contained in the following special tool kits:
- Release and press-out tool 61 1 150
- Replaced as from 09/2005 by 61 0 300 and 61 0 400
Index of connectors:
- IN-LINE PLUGS, 2-PIN, SYSTEM JPT ELA
- IN-LINE PLUGS, 24-PIN, HYBRID SYSTEM MQS/MPQ
- IN-LINE PLUGS, 30-PIN, HYBRID SYSTEM MQS/MPQ
- IN-LINE PLUGS, 6- TO 50-PIN, SYSTEM ELO
- IN-LINE PLUGS, 6-, 8-PIN, SYSTEM MQS
- INLINE PLUGS, 8-, 12-PIN, SYSTEM D2.5
- PLUG HOUSING, LCC CONTACT (LOAD CURRENT CONTACT)
- SOCKET HOUSING (RADIO PLUG), HYBRID SYSTEM MQS/MPQ
- SOCKET HOUSING 42-, 43-PIN, HYBRID SYSTEM MQS / MPQ
- SOCKET HOUSINGS, 2X21-, 2X27-PIN, HYBRID SYSTEMS MQS/MPQ, ELO/ELO-POWER