86 10 ... Removing Loading Ramp Lock

Unscrew bolts (1).

Installation:

Tightening Torque: 86 10 28AZ, see 86 10 PLATFORM .

Fig 1: Identifying Bolts

Courtesy of BMW OF NORTH AMERICA, INC.

Pass lever (1) of rotary striker lock (2) out of square hole (3) by twisting from side to side.

Fig 2: Identifying Rotary Striker Lock & Hole

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew bolts (1).

Installation:

Opening for securing clip (2) points to front or rear.

Square-head nut (3) rests with its square surface parallel to bearing pedestal (4).

Tightening Torque: 86 10 29AZ, see 86 10 PLATFORM .

Fig 3: Identifying Square-Head Nut & Bearing Pedestal

Courtesy of BMW OF NORTH AMERICA, INC.

Raise edge (1) of securing clip and slide in direction of arrow towards rear.

Detach bearing pedestal (2).

Fig 4: Identifying Raised Edge & Bearing Pedestal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install bearing pedestal (1) on stub (3) of locking bracket (3).

Off-center bore (4) in bearing pedestal (1) points with short distance (A) to locking bracket (3).

Fig 5: Identifying Bearing Pedestal On Stub

Courtesy of BMW OF NORTH AMERICA, INC.