86 10 ... Replacing Position Light

Unclip cover (1) on side recess (arrow).

Fig 1: Identifying Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Pull flat connector (1) from flat contact.

Fig 2: Identifying Flat Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out cable (1) completely.

CAUTION:

Before drilling out rivet heads, drive in rivet pins with a punch.

Drill out rivet heads (2) and remove position light housing from front.

Fig 3: Identifying Cable & Rivet Heads

Courtesy of BMW OF NORTH AMERICA, INC.