86 10... Removing rear supports and bracket: Installation

Tightening Torque,

refer to 86 10 26AZ, see 86 10 PLATFORM .

Fig 1: Identifying Rear Support From Bracket And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cable holders (1) from bracket (2). Release screws (3) on left and right sides of bracket (2). Drill out rivets (4) from underside of platform. Drill out rivets (5) from upper side of platform.

Tightening Torque,

refer to 86 10 27AZ, see 86 10 PLATFORM .

Fig 1: Remove Cable Holders From Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Feed cable for rear light (1) through opening (2). Fit cable holders (4) in holes (3).

Fig 1: Fitting Cable Holders In Holes

Courtesy of BMW OF NORTH AMERICA, INC.