Bit-serial data interface (BSD): Notes

The bit-serial data interface is a single-wire data bus with a data transfer rate of 1.2 kBit/s.

The following components are connected across the bit-serial data interface with the DME/DDE control unit:

• Alternator (varies according to version)
• Intelligent battery sensor (depending on model series)
• Preheating control unit (for diesel engines before introduction of the engines N47/N57)
• Electric coolant pump (depending on variant)
• Oil condition sensor (depending on variant)

Only DDE control unit: Each component connected across the BSD is connected to its own pin on the DDE control unit.

However, these pins are interconnected in the control unit.