Functional description
The camshaft position sensor tells the engine-management system whether cylinder no. 1 is currently on the compression stroke or intake or exhaust stroke.
The camshaft sensor is designed as an contactless Hall effect sensor. The camshaft sensor wheel has several different flank spacings. The flank spacings are detected by the hall effect sensor.
The engine control system uses these to calculate: here
- Camshaft speed
- Camshaft speed
- Exact position of the camshaft
| Item | Explanation |
|---|---|
| 1 | Camshaft sensor |
| 2 | Intake camshaft |
| 3 | three-pin plug connection |
For starting the engine, the engine control unit checks the following preconditions:
- Error-free signal from the crankshaft sensor
- both signals must be detected in a specific chronological sequence
This process is referred to as synchronization and is only performed when the engine is started. It is only the synchronization process that enables the engine control unit to activate fuel injection correctly.
When voltage is applied, it is detected whether the sensor is above a tooth or above a gap.