41 11 023 Front Engine Support With Left Wheel Arch Section Replacement Stripping Operations

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Disconnect negative battery cable (FR number: 61 20 900)
Remove bumper trim (job number: 51 11 156)
Remove headlight (job number: 63 12 010)
Remove bumper support (job number: 51 11 050)
Remove front panel (FR number: 41 33 040)
Remove radiator (job number: 17 11 000)
Remove A/C system condenser (job number: 64 53 550)
If necessary, remove charge air cooler (job number: 17 51 000)
If necessary, remove coolant expansion tank (FR number: 17 10 000)
If required, remove air filter housing.
Remove hydraulic steering cooling coil (job number: 17 11 370)
Remove cowl panel cover (job number: 51 13 116)
Remove left wheel arch cover (front section) (FR number: 51 71 038)
Remove left wheel arch cover (rear section) (FR number: 51 71 039)
Remove left side wall (job number: 41 35 010)
Remove engine (job number: 11 00 050)
Remove and install complete front axle (FR number: 31 10 000)
Remove brake booster (job number: 34 33 505)
Release left wiring harness