RSE Remote Control Function

The remote control features two LED for checking operation and battery voltage.

Transmission of a wireless signal is acknowledged by the green send signal lighting.

The remote control signals are only sent if the rear seat entertainment system is switched on.

If the battery voltage reaches a critical level, the red battery symbol will light instead of the green send symbol each time a button is pressed. The battery in the remote control must be replaced to ensure continued operation.

The thumbwheel, the confirmation button and the four-way directional controller mimic the iDrive controller functions:

• Turning the thumbwheel corresponds to turning the iDrive controller.
• Pressing the corresponding button on the four-way directional has the same effect as operating the iDrive controller to the left, right, forwards or back.
• Pressing the confirmation button corresponds to pressing down on the iDrive controller.

The entire remote control changes over to the selected side by operating the selector slide.

The remote control is available in a frequency of 315 MHz for the US version.