Service Information: Initialization: Notes
Initialization of the slide/tilt sunroof involves the following procedures that are necessary to ensure complete functionality of the slide/tilt sunroof:
- Normalization
Normalization means locating the mechanical end position at the stop for the tilt position. This position is stored and is used in calculating the remaining end positions for the slide/tilt sunroof.
- Learning the characteristic curve
The learning procedure registers the closing force necessary for each direction of the slide/tilt sunroof and stores this value.
Complete functionality of the slide/tilt sunroof can be guaranteed only by full initialization.
The initialization procedure can be initiated with the button for the slide/tilt sunroof or via the diagnosis system.