31 00... Notes on repairing threads: Procedure

WARNING: This page is about a different variant/trim than selected.

Create a clean core hole; if necessary, drill out screw remnants

Fig 1: Creating Clean Core Hole
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Helicoil thread insert

Fig 2: Inserting Helicoil Thread On Locating Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Helicoil thread insert in accordance with the TABLE and screw into the locating thread until flush with the original thread

Fig 3: Inserting Helicoil Thread On Original Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove

Fig 4: Removing Drive Pin
Courtesy of BMW OF NORTH AMERICA, INC.