TRSVC Control Unit Cannot Be Programmed (66 01 16)
Publication date: 2016-02-01Reference number: 66 01 16
TRSVC CONTROL UNIT CANNOT BE PROGRAMMED
TECHNICAL SERVICE BULLETIN
| BMW: | F25 (X3); Produced to March 31, 2014; Option code:; 3AG - Rear View Camera; Or; 3AH - Rear View Camera with Top View |
| GROUP: | Distance Systems, Cruise Control, Remote Control |
SUBJECT
TRSVC Control Unit Cannot Be Programmed
SITUATION
During ISTA/P session, ISTA/P requests that the TRSVC (Top Rear Side View Camera) control unit be replaced because ISTA/P cannot program it.
CAUSE
Software error in the TRSVC control unit
CORRECTION
Program the vehicle with compatible software.
PROCEDURE
Program and encode the vehicle with ISTA/P 3.58.0 or higher (The expected release date is March 2016).
Until ISTA/P 3.58.0 is released, submit a PuMA case for an IRAP solution.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks or the BMW Certified Pre-Owned Program.
| Defect Code: | 66 53 04 02 00 |
| Labor Operation: | Labor Allowance: | Description: |
|---|---|---|
| 00 00 006 | Refer to KSD2 | Performing "vehicle test" (with vehicle diagnosis system - checking faults) |
| And: | ||
| 61 21 528 | Refer to KSD2 | Connect an approved battery charger/power supply (indicated in KSD2 as "Charging battery") |
| And: | ||
| 61 00 730 | Refer to KSD2 | Programming / encoding control unit(s) |
If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead.
Vehicle Programming and Encoding
If a control module was working properly and it fails to program correctly or requires initialization, please claim this additional work with the applicable KSD2 labor operations under the defect code listed above.
The diagnosis and repair of vehicles "arriving" with failed control modules or stored faults which will cause them to fail during programming cannot be claimed under the defect code listed in this bulletin.
Other Repairs
If other eligible and covered work is performed "prior" to programming and coding the vehicle, claim this work with the applicable defect code and labor operations listed in KSD2.