86 10... Replacing lashing plate and lashing eye: Installation

Tightening torque,

refer to 86 10 3AZ, see 86 10 PLATFORM .

Fig 1: Identifying Countersunk Head Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Locking lashing eye

Position lashing eye (1) on circular openings on lashing plate (2). Press lashing eye (1) in direction of arrow A into lashing plate (2). In this position, slide lashing eye (1) in direction of arrow B. Spring bar (3) snaps in, anchors and secures lashing eye (1) in lashing plate (2).

Fig 2: Pressing Lashing Eye

Courtesy of BMW OF NORTH AMERICA, INC.