Specifications Index
750i SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Axle Shaft Nut | ||
| Rear | 310 Ft. Lbs. (420 N.m) | |
| Battery | BATTERY | |
| Brakes | ||
| Bleeding Sequence | RR, LR, RF, LF | |
| Disc Brakes | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Charging | ||
| Generator | ALTERNATOR | |
| Torque | ALTERNATOR | |
| Drive Belts | ||
| Adjustment | NA | |
| Belt Routing | DRIVE BELT FOR ALTERNATOR | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM | |
| Radiator Cap Pressure | RADIATOR | |
| Thermostat R & I | THERMOSTAT AND CONNECTIONS | |
| Water Pump R & I | WATER PUMP WITH DRIVE | |
| Engine Mechanical | ||
| Compression | ENGINE IN GENERAL | |
| Oil pressure | Oil pressure should be more than 14 psi (96 kPa) at idle and 58-87 psi (400-600 kPa) control pressure. | |
| Overhaul | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or Maint." button. | |
| Flywheel/Flex Plate Torque | FLYWHEEL | |
| Fuel System | ||
| Fuel Filter Location | On left frame rail and in fuel tank | |
| Fuel Filter R & I | REPLACING OUTER FUEL FILTER or FUEL FILTER WITH PRESSURE REGULATOR | |
| Pressure Release Procedure | NA | |
| Pressure Specification | 75 psi (517 kPa) | |
| Fuel Pressure Test Procedure | FUEL PRESSURE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Routing) | Coil on plug | |
| Spark Plug | ||
| Type | NGK BKR 6EQUP | |
| Gap | Spark plug gap is not adjustable. | |
| Torque | 23 Ft. Lbs. (31 N.m) | |
| Starting | ||
| Starter | STARTER | |
| Torque | STARTER | |
| Wheel Alignment | ||
| Adjustment Specifications | TECHNICAL DATA | |
| Torque | TIGHTENING TORQUES | |
| Wheel & Tire | ||
| Wheel Lug Nut Torque | 103 Ft. Lbs. (140 N.m) | |