62 30... Notes on head-up display

WARNING: This page is about a different variant/trim than selected.

NOTE:

A special windscreen must be fitted to ensure that the Head-Up Display image can be projected correctly.

This windscreen comprises three sections. An outer and an inner glass pane are connected by a wedge-shaped plastic film.

The wedge shape prevents double projection of the Head-Up Display.

When the windscreen is replaced, the vehicle identification number and parts catalogue must be consulted to ascertain whether the windscreen in question is suitable for Head-Up Display.

Example of the display with a conventional windscreen:

With a conventional windscreen, the projected image is reflected on the inner and outer glass pane, producing a double image.

Fig 1: Identifying Example Of Double Image With Conventional Windscreen

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Windscreens for Head-Up Display are marked with the letters "HUD" on the outside at the bottom right below the seal (1).

Fig 2: Locating Area Marked With Letters HUD On Outside At Bottom Right Below Seal

Courtesy of BMW OF NORTH AMERICA, INC.