41 00... Frame Reference Body Dimension

Dimensions in mm.

Dimension tolerances:

• ≤ 1000 mm ± 1.5 mm
• ≥ 1000 mm ± 2.5 mm

The checkpoints shown serve to check the body and the set of attachments.

The specified dimensions always refer to the center point of the bore hole/screw.

Under Body View 1 

Fig 1: Under Body Frame Reference Dimension And Measurement Points (Under Body View 1)

Courtesy of BMW OF NORTH AMERICA, INC.

Under Body View 2 

Fig 2: Under Body Frame Reference Dimension And Measurement Points (Under Body View 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Top View, Front End 

Fig 3: Engine Compartment Frame Reference Dimension And Measurement Points (Top View, Front End)

Courtesy of BMW OF NORTH AMERICA, INC.

The specified dimensions refer to removed assemblies.

View, B-Pillar 

Courtesy of BMW OF NORTH AMERICA, INC.

Measurement a = 1548 mm between screw-on points of door brakes.