General notes

On checking the oil level, the influence of the oil temperature must be taken into account (volume expansion). There is a "MAX" mark on the oil dipstick. The mark indicates the maximum permitted oil level measured at room temperature (20 C). Due to thermal expansion, at oil temperatures of 50 to 70 °C the oil level is approx. 15 mm above the mark. With regard to the oil level, follow the repair instructions.

Vehicles without active roll stabilization can be recognized by the lack of oil-level switch.

After opening the system hydraulics (valve block, swivel motors, lines), run commissioning.

Once the Dynamic Drive control unit has been encoded/programmed it will be necessary to perform a startup routine.