61 35... Removing and installing (replacing) charging interface module control unit

WARNING: High-voltage system - risk of serious injury or death.
The following points must be strictly observed prior to starting work :
Disconnect HIGH-VOLTAGE SYSTEM from power
Observe SAFETY INFORMATION for handling electric/hybrid vehicles.

WARNING: Observe SAFETY INFORMATION for handling vehicle battery.
Follow instructions for DISCONNECTING AND CONNECTING BATTERY .
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS) .

IMPORTANT: Before disconnecting the negative lead, it must be ensured that the vehicle goes to sleep. Observe a waiting period of at least 2 minutes.

Necessary preliminary tasks:

Disconnect BATTERY EARTH LEAD
Remove REAR RIGHT WHEEL ARCH COVER

NOTE: Shown with side wall removed for purposes of clarity.

Release screw (1).

Unlock latch mechanisms and remove charging interface module control unit (2) from bracket.

Unlock plug connections (3) and disconnect.

Fig 1: Removing Charging Interface Module Control Unit From Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out VEHICLE PROGRAMMING/CODING .