Specifications Index

4' SERIES COUPE, CONVERTIBLE, AND GRAN COUPE SEDAN (F32, F33, F36) SPECIFICATIONS INDEX

System		Specification/Procedure
Air Conditioning
Service		TECHNICAL DATA
Torque		TIGHTENING TORQUES
Axle Nut/Hub Nut (Collar Nut)
Front		TIGHTENING TORQUES
Rear		TIGHTENING TORQUES
Battery		BATTERY
Brakes
Bleeding Sequence		RR, LR, RF, LF
Disc Brakes		BRAKE SYSTEM, GENERAL FRONT BRAKES REAR BRAKES
Torque		TIGHTENING TORQUES
Charging
Generator		REMOVING AND INSTALLING OR REPLACING ALTERNATOR (B46/B48 4-CYL. ENGINE) REMOVING AND INSTALLING/REPLACING ALTERNATOR (B58 6-CYL. ENGINE)
Torque		ALTERNATOR AND BELT TENSIONER (B46/B48 4-CYL. ENGINE) ALTERNATOR AND BELT TENSIONER (B58 6-CYL. ENGINE)
Drive Belts
Adjustment		N/A
Belt Routing		REMOVING AND INSTALLING/REPLACING ALTERNATOR DRIVE BELT (B46/B48 4-CYL. ENGINE) REPLACING DRIVE BELT FOR ALTERNATOR (B58 6-CYL. ENGINE)
Engine Cooling
		COOLING SYSTEM (B46/B48 4-CYL. ENGINE) COOLING SYSTEM (B58 6-CYL. ENGINE)
Radiator Cap Pressure		COOLING SYSTEM PRESSURE (B46/B48 4-CYL. ENGINE)
Thermostat R & I		REMOVING AND INSTALLING OR REPLACING HEAT MANAGEMENT MODULE (B46/B48 4-CYL. ENGINE) REMOVING AND INSTALLING/REPLACING HEAT MANAGEMENT MODULE (B58 6-CYL. ENGINE)
Water Pump R & I		REMOVING AND INSTALLING/REPLACING COOLANT PUMP (B46/B48 4-CYL. ENGINE) REMOVING AND INSTALLING/REPLACING THE COOLANT PUMP (B58 6-CYL. ENGINE)
Engine Mechanical
Compression		CHECKING COMPRESSION OF ALL CYLINDERS (B46/B48 4-CYL. ENGINE) CHECK COMPRESSION OF ALL CYLINDERS (B58 6-CYL. ENGINE)
Oil pressure		CHECKING ENGINE OIL PRESSURE (B58 6-CYL. ENGINE)
Overhaul		TECHNICAL DATA
Torque		TIGHTENING TORQUES
Fluid Specifications		See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate Torque		FLYWHEEL (B46/B48 4-CYL. ENGINE) FLYWHEEL (B58 6-CYL. ENGINE)
Fuel System
Fuel Filter Location		In fuel tank
Fuel Filter R & I		REMOVING AND INSTALLING/REPLACING DELIVERY UNIT
Pressure Release Procedure		N/A
Pressure Specification		specification not available, refer to procedure below for checking fuel pressure
Fuel Pressure Test Procedure		CHECKING FUEL DELIVERY PRESSURE (B46/B48 4-CYL. ENGINE) CHECK DELIVERY PRESSURE OF FUEL PUMP (B58 6-CYL. ENGINE)
Ignition
Firing Order		FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires (Routing)		Coil on plug
Spark Plug
Type		12 12 0 040 551
Gap		N/A
Torque		B46/B48 engine: 23 Nm B58 engine: M12x1.25: 23±3 Nm M14x1.25: 30±3 Nm
Starting
Starter		REMOVING AND INSTALLING/REPLACING STARTER MOTOR (B46/B48 4-CYL. ENGINE) REMOVING AND INSTALLING/REPLACING STARTER MOTOR (B58 6-CYL. ENGINE)
Torque		STARTER MOTOR (B46/B48 4-CYL. ENGINE) STARTER MOTOR (B58 6-CYL. ENGINE)
Wheel Alignment
Adjustment Specifications		TECHNICAL DATA
Torque		TIGHTENING TORQUES
Wheel & Tire
Wheel Lug Nut Torque		103 Ft. Lbs. (140 Nm)