Engine block
11 11 ENIGINE BLOCKING - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |||
|---|---|---|---|---|---|---|
| 1AZ Bearing frame to crankcase upper part | W20 | Replace all bolts. | ||||
| M9x1.25 | 1. Joining torque | 3 Nm | ||||
| M6x60 | 2. Joining torque | 3 Nm | ||||
| M9x1.25 | 3. Joining torque | 18 Nm | ||||
| M6x60 | 4. Joining torque | 10 Nm | ||||
| M9x1.25 | 5. Angle of rotation | 90° | ||||
| 2AZ Oil spray nozzles to engine block | W20 | M6x16 | 10 Nm | |||
| 3AZ Crankcase lower section to crankcase upper part | W20 | M8x50 | 23 Nm | |||
| 4AZ Oil cooler connection to crankcase lower section | W20 | 35 Nm | ||||
| 5AZ Oil drain plug to crankcase lower section | W20 | M16x1.5 | Replace the sealing ring. | 28 Nm | ||
| 6AZ Oil filter element to crankcase lower section | W20 | 11 Nm | ||||
| 7AZ Oil drain plug on lower part of the crankcase | W20 | M12x1.5 | Coat the screw with Loctite 360°. | 11 Nm | ||