Anti-roll bar
31 35 ANTI-ROLL BAR - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Anti-roll bar bracket to front axle module | I01 | M10 | Replace screws. (Always comply with tightening specifications: 1. Tighten all screws with joining torque 2. Conduct final torque.) |
|
| Joining torque | 30 Nm | |||
| Final torque | 56 Nm | |||
| 2AZ Anti-roll bar link to anti-roll bar/spring strut | I01 | M10 | Replace nut. | 56 Nm |