1236 Electric Drive Unit Control Module
1236 TIGHTENING TORQUE OVERVIEW
| Busbar to housing | ||
| M5 Replace screw. |
Tightening torque | 4.5 Nm |
| Clamp of excitation cable to housing | ||
| M5 Replace screw. |
Tightening torque | 4 Nm |
| Clamp of excitation cable to threaded bolt | ||
| M5 | Tightening torque | 3.9 Nm |
| Double threaded bolt to housing | ||
| M5 Replace nut. |
Tightening torque | 4.5 Nm |
| Electrical machine electronics busbar to aggregate connection | ||
| M5 Replace screw. |
Tightening torque | 4.5 Nm |
| Electrical machine electronics to housing | ||
| M6 Replace screw. |
Tightening torque | 8 Nm |
| Angle of rotation | 90° | |
| EME busbar at high-voltage connection | ||
| M5 Replace screw. |
Tightening torque | 4.5 Nm |
| Excitation cable to electrical machine electronics | ||
| M5 | Tightening torque | 3.9 Nm |
| High-voltage connector to electric drive unit | ||
| M8x46 | Tightening torque | 19 Nm |
| Shield plate to housing | ||
| M5 Replace screw. |
Tightening torque | 4.5 Nm |
| Y-cable at housing | ||
| M5 Replace screw. |
Tightening torque | 4.5 Nm |
| Y-line to electrical machine electronics | ||
| M5 Replace screw. |
Tightening torque | 4.5 Nm |