Automatic Climate Controls

A/C Control Assembly:

A/C And Heater Control Wiring:

REMOVE OR DISCONNECT

1. Center Instrument Panel (I/P) trim plate.

2. Four (4) heater and A/C control assembly retaining screws.

3. Pull assembly out slightly.

4. Electrical (2) and vacuum connectors.

5. Temperature cable.

6. Heater and A/C control assembly.

INSTALL OR CONNECT

1. Temperature cable to control assembly.

2. Electrical (2) and vacuum connectors to heater and A/C control assembly.

3. Four (4) heater and A/C control assembly retaining screws.

4. Center I/P trim plate.