Inflator Module: Installation
WARNING: This page is about a different car, the 1991 Oldsmobile Custom Cruiser, 1991 Chevrolet Caprice, and 1991 Buick Roadmaster. However, it is still accessible from the selected car via links, so may be relevant.
- Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel.
- Tighten screws to 27 INCH lbs. (3.1 N.m). To complete installation, reverse removal procedure. Check INFLATABLE RESTRAINT indicator light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .