Transmitter Programming
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1993 Chevrolet Caprice, 1992 Oldsmobile Custom Cruiser, 1992 Chevrolet Caprice, 1992 Buick Roadmaster, and 1991 Oldsmobile Custom Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
One or 2 transmitters may be programmed. When 2 transmitters are to be programmed, they must be programmed during same program sequence.
- Connect a fused jumper wire between keyless programming connector terminals "A" (Black wire) and "B" (Black/White wire). Keyless entry receiver will cycle all door lock motors once.
- Press any button on transmitter once. In response, keyless entry receiver will cycle all door lock motors once. If a second transmitter is to be programmed, press any button on second transmitter once. In response, keyless entry receiver will cycle all door lock motors once.