LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Buick >> 1994 >> LeSabre Custom >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Programming >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

NOTE: Following procedure must be performed when replacing RAC module or either transmitter.
  1. Turn ignition off. Connect fused jumper wire between Data Link Connector (DLC) terminals No. 8 (Black/White wire) and No. 4 (Black wire).
  2. Turn ignition on. Press and hold LOCK and UNLOCK button on one transmitter. Repeat procedure for second transmitter. Disconnect jumper wire from DLC.
scientia non olet · About LEMON Manuals