Toe-In Adjustment (Front)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1995 Chevrolet Caprice, 1995 Buick Roadmaster, 1994 Chevrolet Caprice, 1994 Buick Roadmaster, and 1993 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
- Center steering wheel and keep it centered throughout procedure. Loosen adjusting sleeve clamps. See Fig 1 . Rotate adjusting sleeve until threaded part of both tie rod ends is covered by adjusting sleeve (no threads are showing).
- Turn adjusting sleeve until toe-in is as specified. See ALIGNMENT SPECIFICATIONS . Ensure slot in adjusting sleeve is NOT aligned with gap in clamp. Ensure angle of clamp bolt (in relation to horizontal line) is as illustrated. See Fig 1 . Ensure bolt head is facing rearward. Tighten clamp bolts to specification. See TORQUE SPECIFICATIONS .