Toe-In Adjustment (Front)
WARNING: This page is about a different car, the 1996 Cadillac Fleetwood. However, it is still accessible from the selected car via links, so may be relevant.
- Center steering wheel and keep it centered throughout procedure. Loosen adjusting sleeve clamps. See Fig 1 . Rotate adjusting sleeve until threaded part of both tie rod ends is covered by adjusting sleeve (no threads are showing).
- Turn adjusting sleeve until toe-in is as specified. See WHEEL ALIGNMENT SPECIFICATIONS . Ensure slot in adjusting sleeve is NOT aligned with gap in clamp. Ensure angle of clamp bolt (in relation to horizontal line) is as illustrated. See Fig 1 . Ensure bolt head is facing rearward. Tighten clamp bolts to specification. Refer to the TORQUE SPECIFICATIONS .