Fuse Block: Service and Repair

Description:

The fuse block is located on the far right side of the instrument panel.

Remove or Disconnect
1. Battery ground (negative) cable.
2. Instrument panel compartment.
3. Right instrument panel access hole cover from instrument panel.
4. Electrical connectors.
5. Rotate fuse block to release locking tabs.
6. Fuse block from instrument panel.

Install or Connect
1. Position fuse block to instrument panel.
2. Position two side tabs on fuse block into cutout of instrument panel. Rotate fuse block around and snap in to secure.
3. Electrical connectors.
4. Instrument panel compartment.
5. Right instrument panel access hole cover to instrument panel.
6. Battery ground (negative) cable.