Automatic Heater A/C Control

Heater A/C Control:

Remove or Disconnect

1. Battery ground (negative) cable.
2. Front floor console (Buick only).
3. Instrument panel trim plate.
4. Heater A/C control mounting screws.
5. Heater A/C Control.
6. Electrical connectors.

Install or Connect

1. Electrical connectors.
2. Heater A/C control.
3. Heater A/C control mounting screws.

Tighten
^ Screws to 2 N.m (18 lb. in.).

4. Instrument panel trim plate.
5. Front floor console (Buick only).
6. Battery ground (negative) cable.