Cruise Control Module: Service and Repair

Cruise Control Cable Attachment To Module:

Cruise Control Module Mounting:

CAUTION: Refer to Service Precautions.

The cruise control module is mounted to the left strut tower and must be serviced as a complete unit.

REMOVE OR DISCONNECT
1. Cruise control cable from module.
2. Electrical connector from module.
3. Module to shock tower nuts.
4. Module.

INSTALL OR CONNECT

NOTE: Refer to Service Precautions.

1. Module on mounting studs.
2. Module to shock tower nuts.
Tighten
^ Nuts to 2 N.m (18 lb. in.).
3. Electrical connector to module.
4. Cruise control cable to module.
Adjust
^ Cruise control cable.