Diagnostic System Check
- Turn ignition off. Turn ignition on. Security indicator should illuminate for 5 seconds, then turn off. If security indicator stays on, go to TEST NO 1 under SYMPTOM TESTS. If security indicator illuminates for 5 seconds, then flashes, go to TEST NO 2 under SYMPTOM TESTS. If security indicator does not illuminate, see INSTRUMENT PANEL article.
- Ensure transaxle is in Park. Turn ignition switch to START position. Engine should start and security indicator should illuminate for 5 seconds, then turn off. If security indicator stays illuminated, go to TEST NO 1 under SYMPTOM TESTS. If security indicator illuminates for 5 seconds, then flashes (engine may or may not start), go to TEST NO 2 under SYMPTOM TESTS. If security indicator illuminates for 5 seconds, then turns off and engine does not start, go to TEST NO 3 under SYMPTOM TESTS. If security indicator does not illuminate, see INSTRUMENT PANEL article.