Section 4 (Power Mirror System): Testing: Notes
WARNING: This page is about a different car, the 1998 Oldsmobile Intrigue, 1998 Buick Regal, and 1998 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before performing following tests, ensure circuit ground, circuit harness wiring and circuit fuse are okay. Also, ensure all circuit connections are clean and tight.
NOTE:
For testing of heated mirrors, see appropriate REAR WINDOW & MIRROR DEFOGGERS article:
- REAR WINDOW & MIRROR DEFOGGERS - Century & Regal
- REAR WINDOW & MIRROR DEFOGGERS - Intrigue
NOTE:
To identify connectors and wire colors, see WIRING DIAGRAMS
.
CAUTION:
To prevent damage to terminals, Connector Test Adaptor Kit (J-35616-A) must be used whenever a diagnostic procedure requires checking or probing terminals. To locate and identify terminals, see WIRING DIAGRAMS
.