EEPROM Programming

1. Set-up - Ensure that the following conditions have been met:
^ The battery is fully charged
^ The ignition is ON
^ The Techline equipment cable connection at the DLC is secure
2. Program the PCM using the latest software matching the vehicle. Refer to up-to-date Techline equipment users instructions.
3. If the PCM fails to program, proceed as follows:
^ Ensure that all PCM connections are OK.
^ Check the Techline equipment for the latest software version.
^ Attempt to program the PCM. If the PCM still cannot be programmed properly, replace the PCM. You must program the replacement PCM.
^ Perform the Crankshaft Variation Learn Procedure. Refer to CKP System Variation Learn Procedure